Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
11mm overall height
Brembo rubber bleed nipple cap without retaining ring
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT 
Dimensions:
M6 x 13mm
Titanium shouldered retaining screw for rocker cover. 4 required for each big twin cylinder head, 3 per head on small twins. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer on CARC models and ENA06716 for sealing washer on other models
More than 5 in stock
842291 MG842291
£5.50
INC VAT
£4.58 EX VAT
Dimensions:
M10 x 1
Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems
These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt
More than 5 in stock
Also fits Benelli 250 TS
£21.00
INC VAT
£17.50 EX VAT
Stainless steel nyloc (anti-vibration) M6 nut, won't loosen over time, used for many applications
Can be used in place of Guzzi ref. 92700073
More than 5 in stock
92602206-
£0.60
INC VAT
£0.50 EX VAT
Dimensions:
100cm
One metre of copper core HT lead, this is superior to the more commonly available carbon core lead
Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector
More than 5 in stock
£7.00
INC VAT
£5.83 EX VAT
Dimensions:
A3 - 298mm x 420mm
Stylish A3 Moto Guzzi Steam and Falcone poster featuring original artwork by Carl Hunton. Celebrating the age of steam the print commemorates s a time when everything moved more slowly. Equally at home in your workshop or living room, treat yourself to this inspiring and timeless image, or buy a friend the perfect Guzzi gift.
Printed on high quality glossy A3 paper, ready to frame
More than 5 in stock
£4.00
INC VAT
£3.33 EX VAT
Dimensions:
500ml
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
Dimensions:
M5 x 30mm
A2 Stainless steel M5 socket cap screw, many uses including as long screw retaining filler cap, 3 required on 1100 Sport, Daytona and V11 Sport
More than 5 in stock
98690230 GU98690230 98 69 02 30
9869 0230 9869.0230 98.69.02.30
£0.80
INC VAT
£0.67 EX VAT
Dimensions:
M10
Stainless steel M10 full nut, many applications
More than 5 in stock
£0.50
INC VAT
£0.42 EX VAT
Dimensions:
M10 x 45mm
A2 stainless socket cap screw M10 x 45, used for top F08 brake caliper mount bolts (in conjunction with a M10 nut and washer)
More than 5 in stock
98052545-z 98052545 GU98052545 98 05 25 45
9805 2545 9805.2545 98.05.25.45
£1.50
INC VAT
£1.25 EX VAT
Secure online shopping 
